Complete Guide and Download Link for Axioo PicoPhone M4s M2/M (MT6580) Firmware
Every Android smartphone user, including Axioo PicoPhone M4s M2/M users, may encounter system issues at some point. Problems like a smartphone stopping at the logo when turned on (commonly known as bootloop), a device suddenly dying after failing to update, or malware infection causing numerous pop-up ads are common issues.
To resolve these severe software issues, the best solution is to reinstall the system operating system or, more commonly known as flashing firmware. This article will comprehensively discuss the use, preparation, and provide a free download link for the Axioo PicoPhone M4s M2/M firmware with Mediatek MT6580 chipset.
When Do You Need This Firmware?
Downloading and flashing firmware is not a daily activity. This action is usually taken as an advanced troubleshooting step when your Axioo device experiences critical conditions:
- Bootloop: The device cannot enter the main menu and only spins around the Axioo logo when turned on. This usually occurs due to damaged system files caused by modifications, full memory, or accumulated cache.
- Total Death (Hardbrick) Due to Incorrect Firmware: Installing a custom ROM that is not compatible or incorrectly selecting the firmware version can cause the smartphone to die completely and not respond at all. Re-flashing with this stock firmware can bring it back to life.
- Malware Infection: Some aggressive Android viruses directly attach to the main system (root). A factory reset (Factory Reset) will not remove them, so a total flash is required to thoroughly clean the memory.
- After eMMC Replacement: For experienced phone technicians, after replacing the eMMC IC (internal memory component), the device needs a new system file to function normally again.
Preparation Before Flashing
Before proceeding with the system installation, several crucial preparations must be made:
Battery Level: Ensure your phone's battery level is at least 50% to 60% to prevent the device from dying during the data writing process, which can be fatal.
USB Cable: Prepare a good-quality original or USB data cable to ensure stable data transmission between the phone and computer.
PC Driver: You must install Mediatek (MTK) USB VCOM Drivers on your Windows PC or laptop to ensure the device is properly detected by the flashing software.
Backup Data: If your phone is still accessible, it is highly recommended to back up important data, as this process will erase all data in the internal storage.
Device Specifications and Firmware Details
The firmware provided here is an extraction (backup) using CM2 software. Although this file has been tested and successful on the testing device, its success on your device depends on the compatibility of your device's hardware and the physical condition of the eMMC.
| Specification & Detail | Description |
|---|---|
| Platform / Chipset | Mediatek MT6580 |
| CPU ABI | armeabi-v7a |
| Manufacturer | Axioo |
| Board / Device Name | PICOphone M4S(M2/M) |
| Brand / Model | Axioo / PICOphone M4S(M2/M) |
| Build ID | LMY47I |
| System Operating Version | Android 5.1 Lollipop (PICOphoneM4SGDG0_SW20160506) |
| Build Description | fullkeytak6580weg_l-user 5.1 LMY47I 1462505814 test-keys |
Brief Guide to Flashing with SP Flash Tool
Given that Axioo PicoPhone M4s uses the Mediatek (MTK) chipset, the best and most commonly used tool for this process is SP Flash Tool. Here is a general overview of the process:
- Download and extract the firmware file and SP Flash Tool on your PC.
- Open the SP Flash Tool application (
flash_tool.exe) with Run as administrator. - On the Download tab, click the Choose button in the Scatter-loading File column and navigate to the extracted firmware folder. Select the file
.txtending with the "scatter" keyword. - Wait for a few seconds until the partition list is loaded.
- Click the Download button (green arrow) at the top of the application.
- With the device turned off, connect the Axioo phone to the computer using a USB cable (sometimes requiring simultaneous pressing of the volume up/down button for detection).
- The flashing process will run automatically, indicated by the progress bar at the bottom of the application.
- Once complete, a green circle with a checkmark will appear with the text "Download OK". Disconnect the cable and turn on your device.
Download Link
Please download the required firmware file through the third-party link below. Ensure your internet connection is stable due to the large file size.
- ROM File Name:
PICOphoneM4SGDGV2_SW20161130.zip - File Type: Stock ROM / Firmware / CM2 Backup File
- File Size: 726 MB
- Download Link:
No approved comments yet.